Catalogue

RLC-PRC029-EN 121
Dimensions
Table 63. RTWD/RTUD – 60 Hz Dimensions – 150-250 tons
RTWD RTUD
High Efficiency Prem Efficency
150-200
inch/mm
220, 250
inch/mm
150-200
inch/mm
150
inch/mm
160-200
inch/mm
220,250
inch/mm
A (2 pass evap)
132.9/3376 136.7/3472 147.8/3754 127.0/3225 132.9/3376 136.7/3472
B (3 pass evap)
133.0/3378 136.7/3472 150.8/3831 130.7/3320 133.0/3378 136.7/3472
C
75.6/1920 76.9/1955 76.8/1950 76.9/1955 75.4/1916 75.4/1916
D
49.4/1256 49.9/1267 49.4/1256 39.4/1002 49.5/1258 49.5/1258
E
21.5/547 21.5/547 21.5/547 11.4/290 21.5/547 21.5/547
F
10.5/267 11.2/285 10.4/265
G
32.7/830 33.1/840 33.8/860
H
42.4/1078 43.9/1115 43.6/1108
J (2 pass evap)
10.1/256 10.6/270 10.6/270 10.2/259 10.1/256 10.1/256
J (3 pass evap)
9.5/241 9.7/247 9.7/247 9.7/247 9.5/241 9.5/241
K (2 pass evap)
19.3/490 20.6/524 20.6/524 18.9/479 19.3/490 19.3/490
L (3 pass evap)
19.9/505 21.6/549 21.6/550 19.2/487 19.9/505 19.9/505
M
36.0/914 36.0/914 36.0/914 36.0/914 36.0/914 36.0/914
N
36.0/914 36.0/914 36.0/914 36.0/914 36.0/914 36.0/914
P*
40/1016* 40/1016* 40/1016* 40/1016* 40/1016* 40/1016*
R
114.8/2916 114.8/2916 134.5/3416 114.8/2916 114.8/2916 114.8/2916
S
36.0/914 36.0/914 36.0/914 36.0/914 36.0/914 36.0/914
Reference
1
Evaporator Water Inlet
2
Evaporator Water Outlet
3
Condenser Water Inlet (RTWD only)
4
Condenser Water Outlet (RTWD only)
5
Power Disconnect
6
Power Wire
7
Control Wire
8
Control Panel
9
Condenser Return Waterbox End (RTWD only) - Minimum Clearance (for tube removal)
10
Condenser Supply Waterbox End (RTWD only) - Minimum Clearance (for maintenance)
11
Condenser (RTWD only)
12
Evaporator
13
Panel Power Section [door swing 31.3 inch (796.9 mm)]
14
Panel Power Section [door swing 31.1 inch (790.1 mm)]
15
Panel Control Section [door swing 22.4 inch (568.14 mm)]
II
2 Pass Evaporator Unit
III
3 Pass Evaporator Unit
*
Control panel clearance is 36 or 40 inch (914 or 1016 mm) depending on voltages, starter type, unit application and local
code; 42 inch (1067 mm) clearance required to other grounded parts; two units with panels facing each other or other
live parts require a clearance of 48 inch (1220 mm).