Catalogue

UV-PRC004-EN 5
Features and Benefits
Made for the Classroom
Equipment Size
The horizontal unit ventilator delivers from 750 cfm to 2000 cfm. Trane’s unit ventilator is sized to
fit any replacement or new construction application.
Cabinet Finish
The unit cabinetry is made of durable industrial grade metal for hard wearing applications. All steel
surfaces are cleaned, phosphatized, rinsed and dried before applying a final paint finished on metal
that may be exposed to the room decor.
Access
Access to the air filter is made through the bottom of the unit providing effortless access for filter
change-out. The access panel is available with a safety chain option for protection from dropping
the panel during normal maintenance situations.
Spacious End Pockets
The 13-1/2-inch wide by 30-inch high by 15-1/4-inch deep (standard) to provide uncomplicated field
installation of valves, piping, and controls. Several large knockouts are provided in both the left and
right end pockets for electrical and piping connections.
Control Connections
All electrical connections are made in the left-hand end pocket for equipment not specified with
electric heat. Units equipped with the electric heat option have in-coming power connections made
in the right-hand end pocket.
Fan Board
The fan board assembly is acoustically designed in a single, rigid assembly that includes the fans,
fan housing, bearings, fan shaft and motor. The fan motor is mounted on the heavy gauge,
galvanized fan board assembly to help resist corrosion while increasing strength and rigidity. The
fan board is removable through two metal screws for service or maintenance/cleaning of the fan
housings.
Figure 1. Cabinet access
UV-PRC004-EN.book Page 5 Monday, February 4, 2013 11:01 AM