Catalogue

UV-PRC004-EN 21
General Data
Table 1. Weights and measurements: horizontal unit ventilators
Unit Size 075 100 125 150 200
Unit Length (in.) 70-1/4 82-1/4 94-1/4 106-1/4 106-1/4
Unit Height (in.) 16-5/8 16-5/8 16-5/8 16-5/8 17-5/8
Unit Width (Front Discharge) (in.) 35-5/8 35-5/8 35-5/8 35-5/8 43-1/8
Unit Width (Bottom Discharge) (in.) 48-3/4 48-3/4 48-3/4 48-3/4 57-1/4
Shipping Weight (lb)
(a)
340* 375* 435* 500* 600*
Filter Size (inches-actual) 41-1/2 x 15-1/4 x 1 53-1/2 x 15-1/4 x 1 65-1/2 x 15-1/4 x 1 77-1/2 x 15-1/4 x 1 77-1/2 x 15-1/4 x 1
(a) Working weight is approximately 10% less than shipping weight. Trane recommends 1/4-inch rods for hanging suspension
Table 2. Standard motor data (typical for AA coil)
Unit Size Volts RPM (Nominal) CFM (Nominal) Amps (FLA) Watts HP
75 115/60/1 1050 750 13 135 1
100 115/60/1 1050 1000 13 180 1
125 115/60/1 1050 1250 13 191 1
150 115/60/1 1050 1500 13 221 1
200 115/60/1 875 2000 13 311 1
Table 3. Hi-ESP motor data (typical for AA coil)
Unit Size Volts RPM (Nominal) CFM (Nominal) Amps (FLA) Watts HP
75 115/60/1 1330 750 13 198 1
100 115/60/1 1330 1000 13 287 1
125 115/60/1 1330 1250 13 305 1
150 115/60/1 1330 1500 13 357 1
200 115/60/1 1200 2000 13 770 1
Table 4. Coil area
Unit Size Length (in) Width (in) Face Area (in
2
)
075 42 12 504
100 54 12 648
125 66 12 792
150 78 12 936
200 78 12 936
Table 5. Inlet grille free area
Unit Size
Horizontal Minimum Free Area
Outlet (in
2
)Inlet (in
2
)
075 232 144
100 296 192
125 364 240
150 and 200 430 288
UV-PRC004-EN.book Page 21 Monday, February 4, 2013 11:01 AM