Specifications

©American Standard Inc. 2000
MUA-PRC001-EN
Introduction
To help relieve negative pressure inside
commercial and industrial facilities, such
as factories, garages, packing plants,
kitchens, bowling alleys, and welding
and foundry areas. Trane’s make-up air
units offer a wide range of cfm, from
1,600 to 64,000, and gas-fired burners
with capacities from 131,000 Btuh to
7,748,000 Btuh. These ranges offer
excellent variety when selecting a unit
that will fill both the owner’s needs and
those of the specifying engineer. These
units are flexible in that they can be
located indoors or outdoors, and either
curb or grade mounted.
All standard units include the necessary
controls for operation, such as a flame
safeguard, an air proving differential
switch, a high temperature limit switch,
and an ignition transformer. Component
parts are of the highest quality. Each unit
has overlapping, fail-safe protection
devices to handle failures should they
occur. Each unit is factory tested before it
ships, and is designed to provide years
of reliable, low maintenance operation.
Units are built with UL approved
components, where applicable. Special
gas controls can be furnished to comply
with FM or IRI requirements.
Why Use Trane Make-Up Air Units?