TDD-D-1 Downflow/Horizontal Right or Downflow/Horizontal Left Induced Draft Gas Furnace XR 80 TDD040,060,080,100,120,140C Single-Stage Fan Assisted Combustion System PUB. NO.
General Features Natural Gas Models Central Heating furnace designs are certified by the American and Canadian Gas Associations for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards. Air Delivery The 4-speed, direct drive blower motor, has sufficient airflow for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat.
Contents General Features 2 Features and Benefits 4 Standard Equipment Optional Equipment General Data TDD040C924F TDD060C924F TDD060C936F TDD080C936F TDD080C945F TDD100C945F TDD100C948F TDD100C954F TDD120C954F TDD120C960F TDD140C960F 22-1671-04-0702 (EN) 4 5 6 6 6 6 7 7 7 8 8 8 9 9 Performance Data 10 Electrical Data 12 Field Wiring 13 Dimensions 15 3
Features and Benefits XR 80 Downflow/Horizontal Right or Left Standard Equipment • Power supply 115/1/60 • Quiet slow opening gas valve • Multi-port In-shot burners • Downflow convertible to horizontal on left or right side • Integrated solid state control with selfdiagnostics • Silicon Nitride hot surface igniter with adaptive heat up • Complete front service access • Insulated blower door • Insulated blower compartment • Accessory hook-up capability – Hum and EAC • Heavy gauge aluminized steel heat
Features and Benefits Optional Equipment Thermostat ............................................................................................................................................................... BAYSTAT388 [ Thermostat, Heating/Cooling Single Stage (Mounts Horizontally) .................................................................................. AY28X092 [ Thermostat, Heating/Cooling Single Stage (Mounts Vertically) ....................................................................
General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type -Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty.
General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type -Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty.
General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type -Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty.
General Data Product Specifications 1 MODEL TYPE RATINGS 2 Input BTUH Capacity BTUH (ICS) 3 AFUE Temp. rise (Min.-Max.) °F. BLOWER DRIVE Diameter - Width (In.) No. Used Speeds (No.) CFM vs. in. w.g. Motor HP R.P.M. Volts / Ph / Hz COMBUSTION FAN - Type Drive - No. Speeds Motor HP - RPM Volts / Ph / Hz FLA FILTER — Furnished? Type Recommended Hi Vel. (No.-Size-Thk.) VENT — Size (in.) HEAT EXCHANGER Type -Fired -Unfired Gauge (Fired) ORIFICES — Main Nat. Gas. Qty. — Drill Size L.P. Gas Qty.
Performance Data FURNACE AIRFLOW (CFM) VS. STATIC PRESSURE (ins. w.g.) MODEL SPEED TAP 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 TDD040C924F 4 3 2 1 - HIGH - Black MED.-HIGH - Blue MED.-LOW - Yellow LOW - Red 1070 870 740 633 1033 850 720 600 1000 823 690 577 960 790 663 543 920 753 627 507 860 813 588 463 810 667 547 420 740 613 483 360 490 - TDD060C924F 4 3 2 1 - HIGH - Black MED.-HIGH - Blue MED.
Performance Data CFM VS.
Electrical Data SCHEMATIC DIAGRAMS FOR GAS FURNACES From Dwg. 21D341705 Rev.
Field Wiring FIELD WIRING DIAGRAM FOR SINGLE STAGE HEATING ONLY From Dwg. 21B341437 Rev. 1 FIELD WIRING DIAGRAM FOR SINGLE STAGE HEATING/COOLING (OUTDOOR SECTION WITHOUT TRANSFORMER) From Dwg. 21B341436 Rev.
Field Wiring From Dwg. 21B341422 Rev. 1 From Dwg. 21B341423 Rev.
(ALL DIMENSIONS ARE IN INCHES) TDD-C OUTLINE DRAWING From Dwg. 21C341700 Rev.
TheTrane Company An American Standard Company www.trane.com Literature Order Number TDD-D-1 File Number PL-UN-FURN-TDD-D-1 Supersedes TDD-D-1 3/98 Stocking Location PI Louisville & Webb/Mason-Houston 7/02 Since The Trane Company has a policy of continuous product and product data improvement, it reserves the right to change design and specifications without notice. P.I.
