User manual

2
Properties
• For driving max.10 LED
• Adjustable step number
• Adjustable step speed
• Integrated current limiting resistor
Technical parameters
Supply voltage: 7 – 24 V
Idle mode current consumption: 20 mA
Max. current consumption: 40 mA
Dimensions: 40 x 38 mm
Short description
Running light module for illuminated advertisement boards,
diversions etc.
Wiring
The module must be wired according to Figure 1. The supply
voltage is connected to the "POWER" point.
Adjustment
The light running speed can be set by the "Speed" potentiometer.
If more than 10 LEDs are connected to the output of the running
light module, the max. number of steps shall be set by means of
the "JP1" jumper (See Figure 1).