User manual

2
Features and properties
• DC and AC supply
• Two servo independent controlling
• External control inputs
• Fast and easy end-position setting
• Adjustable moving speed
Technical parameters
Input supply voltage: 7 – 24 V
Stand-by current consumption: 20 mA
Maximal current consumption: 1000 mA
Control input max. voltage: 3 – 24 V
Dimensions: 62 x 58 mm
Short description
With this module two servos can be controlled independent of each
other. The external inputs switch the position of the servos to the
desired position.
External power supply
The device can be supplied by an external power supply or by the
DCC signal. An external power supply is beneficial in this case as it
helps to avoid further on your DCC system. When choosing the
power supply remember to consider the maximum current drain
during switching (moving servo).
Possibility of external control
The device can be controlled by the DCC accessory decoder or by
external, manual switch inputs (IN1, IN2). You may connect DC or
AC voltage between 5 and 16 V to this inputs. These inputs are
galvanically separated.
The module is equipped with a mode selector jumper (MODE). Two
modes are available: Toggle and continuous mode.