User manual

2
Features and properties
 DC and AC supply
 Two servo independent controlling
 External control inputs
 Fast and easy end-position setting
 Adjustable moving speed
Technical parameters
Input supply voltage: 7-24V
Stand-by current consumption: 20 mA
Maximal current consumption: 1000 mA
Control input max. voltage: 3-24V
Dimensions: 62x58 mm
Short description
Two servo can be controlled independently with this module. The
external inputs switch the servos position's to the desired position.
External power supply
The device can be supplied from separate power supply or from the
DCC signal. The advantage of separate power is that the module does
not load the DCC system, so no unnecessary extra load occurs in the
DCC booster.
Please remember the maximum current drain during switching (moving
servo) when you choosing a power supply.
Possibility of external control
The device can be controlled through the DCC accessory decoder or an
external manual switch input (IN1, IN2). You may connect DC or AC
voltage between 3 and 24 V to this input. This input is galvanically
separated.
The module has a mode selector jumper (MODE). Two modes are
available: Toggle, and continuous mode.