TM-73726 Servo controller User's manual
© 2013 BioDigit Ltd. All rights reserved. It is forbidden to reproduce and/or publish the contents of the present document in any form including electronic and mechanical design without the written permission of BioDigit Ltd. Safety warning During the operation of the device the specified technical parameters shall always be met. At the installation the environment shall be fully taken into consideration. The device must not be exposed to moisture and direct sunshine.
Features and properties DC and AC supply Two servo independent controlling External control inputs Fast and easy end-position setting Adjustable moving speed Technical parameters Input supply voltage: 7-24V Stand-by current consumption: 20 mA Maximal current consumption: 1000 mA Control input max. voltage: 3-24V Dimensions: 62x58 mm Short description Two servo can be controlled independently with this module. The external inputs switch the servos position's to the desired position.
For external control, connect the IN1 / IN2 input as the light bulb, or other load. These inputs are polarity insensitive, and need to be supplied from external source. See Figure 1. Connection of servo The servo must be connected to the terminal pins as indicated in the drawing. BLACK/BROWN output is the common zero (ground) point. By standard the RED cable is the power supply of the servo, which is always 5 V. The WHITE/ORANGE output is the control signal of the output.
Guarantee and legal statement Each parameter of the device will be submitted to comprehensive testing prior to marketing. The manufacturer undertakes one year guarantee for the product. Defects occurred during this period will be repaired by the manufacturer free of charge against the presentation of the invoice. The validity of the guarantee will cease in case of improper usage and/or treatment.
Figure 1.
