User manual

2
Features and properties
• Compact design
• Continuously adjustable flashing intervals
• Low power consumption
• 3 mm high power LED
Technical parameters
Supply voltage: 3 – 16 VDC
Idle mode current consumption: 0.5 mA
Max. current consumption: 20 mA
Dimensions: 20 x 9 mm
Short description
Attractive warning light effects can be created with this board via
flashes with a short fixed lighting time and variably installed
flashing intervals. E.g. storm warning light, flash lamp etc.
Wiring
Wiring shall be performed as shown in Figure 1, with consideration
of the correct polarity. The included LED can be connected directly
to via module or through a wire.
Adjustment
The flashing interval can be adjusted by potentiometer "P" as
shown in the figure.