User manual

2
Features and properties
• Continuously adjustable timing
• High load current
• AC or DC power supply
Technical parameters
Input supply voltage: 5 – 24 V
Idle mode current consumption: 5 mA
Max. current consumption: 500 mA
Dimensions: 38 x 30 mm
Short description
Devices of any type connected to the two outputs are alternatively
switched on/off by the blinker circuit according to the preset
timing. Timing is adjustable between 0.1 sec. and 5 sec. by means
of the two P1 and P2 potentiometers.
It can be used for the timing of flashing advertisement boards,
magnet coils etc.
Wiring
The detailed wiring diagram of the circuit can be found at the end
of the user’s manual (Figure 1).
The input supply voltage is connected to the points "POWER".
The "+V" output carries the rectified voltage of the input supply
voltage.