Use And Care Manual

XL Mounting bracket assembly
Please note that use of the XL Mount Bracket decreases the unit’s incline rating. If you have any
questions concerning the use of your trailer Valet on a slope or incline, please contact us at
[phone] or Email us at [e-mail]
For warranty information, please refer to your main Trailer Valet unit’s user manual.
SETUP
When installing your Trailer Valet unit, it must be installed while the weight of the trailer is
supported by an existing jack. Having wheel chocks in place during connection will also insure a
safe install.
Raise the trailer tongue to where the coupler is about 16 inches o the ground to give adequate
space to attach the dolly.
WARNING!
During installation for the Trailer Valet XL, the Steering Handle must be secured to the safety
clip to ensure the brake is engaged at all times. The mounting bracket has incremental bolt
slots to t a variety of trailer frames. Be sure that you have at least 8 inches of free space for the
mounting bracket to be tted onto your trailer frame.
WARNING!
The mounting bracket is only to be installed on trailer tongues that are rectangular in prole.
Cylindrical frames are not compatible with the bracket as it will rotate, allowing the trailer to drop.
1
2
3
4
6 8
5
7
1. Mount Bracket
2. Bracket Clamps
3. Bracket Bolts (x4)
4. Mounting Joint
5. Stow/Clevis Pin
6. Cotter Pin
7. Rotation/Security Pin
8. Security Bolt
WHat’s in the box