Instructions / Assembly

TRAILER VALET XL W/ MOUNT BRACKET
Quick Start Guide
STOW PINMOUNTING JOINT
Check that you have all your
parts and accessories.
FOAM STRAP
BRACKET BOLTS (4X)
MANUALXL UNIT
BRACKET
CLAMPS (2X)
DRILL
ATTACHMENT
CRANK
HANDLE
ROTATION
PIN
SECURITY
BOLT
MOUNT BRACKET
Scan the QR code to access some
helpful videos to help you get started
and #MoveForward.
To use the XL with a drill, read the manual for
step-by-step instructions. For supporting
documents, visit us at support.trailervalet.com.
Connect XL unit to Mount
Bracket and secure with
stow pin.
Attach the crank handle, lift the
steering handle to disengage
brakes, and start moving!
5.
OPTIONAL: Lock with security
bolt located in the back of the
bracket to prevent removal.
6.4.
Check trailer height and raise the
trailer tongue to where the frame
is about 16 inches o the ground
to give adequate space to attach
the dolly.
Install the XL Mount bracket to
your trailer frame.
1. 2.
Attach mounting joint to the
rotating coupler on the XL unit
using the rotation pin.
3.
16”