Instructions / Assembly

TRAILER VALET XL W/ BALL MOUNT

Quick Start Guide

Check trailer height and raise

the trailer tongue to where the

frame is about 16 inches o

the ground to give adequate

space to attach the dolly.

Attach hitch ball w/ ball base to

coupler.

1. 2.

Use spanner wrench and tighten

that base!

Using your trailer jack, lower the

hitch towards the unit’s rotating

coupler and attach rotation pin

to secure.

Make sure the XL is securely

tightened and not rocking.

Attach the crank handle, lift the

steering handle to disengage

brakes, and start moving!

6.4.

Scan the QR code to access some

helpful videos to help you get started

and #MoveForward.

To use the XL with a drill, read the manual for

step-by-step instructions. For supporting

documents, visit us at support.trailervalet.com.

XL UNIT

ROTATION PIN

DRILL ATTACHMENT

SPANNER WRENCH

COUPLING PLATE

HITCH BALL BALL BASE

HAND CRANK MANUAL

Check that you have all your

parts and accessories.

LOCKED

16”

PAGE 1
TRAILER VALET XL W/ BALL MOUNT Check that you have all your parts and accessories. Quick Start Guide SPANNER WRENCH 16” DRILL ATTACHMENT ROTATION PIN XL UNIT COUPLING PLATE HITCH BALL BALL BASE HAND CRANK MANUAL 1. Check trailer height and raise the trailer tongue to where the frame is about 16 inches off the ground to give adequate space to attach the dolly. 2. Attach hitch ball w/ ball base to coupler. 3. Use spanner wrench and tighten that base! 6.
PAGE 2
TRAILER VALET XL W/ MOUNT BRACKET Check that you have all your parts and accessories. Quick Start Guide SECURITY BOLT ROTATION PIN 16” CRANK HANDLE XL UNIT MANUAL DRILL ATTACHMENT 1. Check trailer height and raise the trailer tongue to where the frame is about 16 inches off the ground to give adequate space to attach the dolly. 2. Install the XL Mount bracket to your trailer frame. 3. Attach mounting joint to the rotating coupler on the XL unit using the rotation pin. 4.