Full Product Manual
OPERATING INSTRUCTIONS
8
TESTING THE ASSEMBLY
Always ensure the operator and bystanders are aware of load stability.
1) Lower the trailer gradually until the existing jack is above the ground and the trailer is
completely supported by the XL.
NOTE: Keeping the trailer jack close to the ground prevents serious damages from occurring
due to unexpected failures.
ATTACHING DRIVER
Option 1: Manual Operation with the Hand Crank.
1) Attach the Hand Crank to the low or high gear Driveshaft.
Option 2: Using the Drill Adapter.
1) Using the chuck of your drill/driver, connect to the Drill Adapter.
2) Secure the chuck of your drill around the Drill Adapter tightly to avoid the Adapter
slipping o the drill.
3) Align and insert the Drill Adapter to the low gear Driveshaft.
NOTE: If you are using a cordless drill, be sure your battery pack is fully charged before use.
Follow your drill/driver manufacturer’s recommendation.
DO NOT use your drill on the high gear.
Knowing the proper techniques to operate your XL can help keep you and others around you
safe. In this guide, you are shown the basic fundamentals for eective operations. However, it is
up to you to analyze the situation and make the decisions necessary for the proper use of your
XL. Apply your knowledge of your XL and the basic fundamentals you have practiced to adjust
your techniques to each unique situation.
Videos are available on the Trailer Valet website if you
need a visual guide to install or use your XL.
Visit our website to see a video on how to use your
drill attachment to move your XL.