XL OPERATING MANUAL
OPERATING MANUAL WARNING Carefully read and understand all the instructions before connecting your new XL. Failure to follow these guidelines may result in serious injury to persons and property for which Trailer Valet will not be held liable. Do not allow persons to operate or assemble this unit until they have read this manual and have developed a thorough understanding of how the unit works. TABLE OF CONTENTS WARNING AND TABLE OF CONTENTS.................................................................
IMPORTANT SAFETY INFORMATION SAVE THESE INSTRUCTIONS Failure to heed these markings may result in personal injury and/or property damage: 1. DO NOT use the XL on slopes and inclines beyond stated limits. 2. DO NOT attempt to use the XL to pull up (nose first) or to push down (rear first) an incline. Always move along an incline with the unit on the lower end of the incline. 3.
SPECIFICATIONS The Trailer Valet is made of high strength steel and given a powder coat finish made to resist corrosion from the elements and marine use. When cared for properly, it will provide years of service. The Trailer Valet mounts to the coupler of the trailer tongue with the aid of our specially designed Ball Attachment. Once attached to your trailer, the Trailer Valet makes maneuvering your trailer much easier. Hitching, unhitching, and moving is now done with precision.
WHAT’S IN THE BOX Upon removing items from packaging, it is very important to thoroughly inspect all parts of the system before using the device. Any part that is missing or damaged must be immediately replaced. Contact Trailer Valet Customer Service at 1-844-846-9344 or Support@TrailerValet.com Hitch Ball Ball Base Rotation Pin Spanner Wrench Hand Crank Manual Coupling Plate Drill Attachment The Trailer Valet XL 1. Steering/Brake Handle 2. Brake Cap 3. Low Gear Driveshaft 4. Brake Handle Clip 5.
ASSEMBLY STEP 1: Check trailer height and ensure installation is on a flat surface. STEP 2: Set up hitch ball and ball base.
ASSEMBLY STEP 4: Using your trailer jack, lower the hitch towards the unit’s rotating coupler and attach rotation pin to secure. STEP 5: Make sure the XL is securely tightened and not rocking.
OPERATING INSTRUCTIONS Knowing the proper techniques to operate your XL can help keep you and others around you safe. In this guide, you are shown the basic fundamentals for effective operations. However, it is up to you to analyze the situation and make the decisions necessary for the proper use of your XL. Apply your knowledge of your XL and the basic fundamentals you have practiced to adjust your techniques to each unique situation.
OPERATING INSTRUCTIONS OPERATING THE DEVICE NOTE: If your trailer has built-in brakes, they must be disengaged prior to operation of the XL. Consult your trailer manufacturer’s manual/instructions on temporary brake release. If this is not available to you, please contact Trailer Valet Customer Support through phone or email for assistance. 1) When you’re getting ready to operate the device, make sure you have one hand firmly gripped on the brake, and the other hand firmly gripped on the drill/driver.
MAINTENANCE CHECK BEFORE BEFORE FIRST USE EACH USE EVERY 90 DAYS Take the time to read and understand these operating instructions in order to understand your XL and its operations. Read and understand your drill/driver operator’s manual and instructions. Inspect the XL for damage. Replace any damaged parts immediately. If a part must be replaced, contact Trailer Valet Customer Service 844-846-9344.
LIMITED MANUFACTURER’S WARRANTY SuperTech S Corp warrants for one year from the purchase date that the product will be in working condition and will be free from manufacturing defects, provided that installation and use of the product is in accordance with product instructions. This warranty is only made to the original consumer purchaser and is non-transferable. ALL OTHER WARRANTIES IMPLIED OR EXPRESSED ARE HEREBY DISCLAIMED. THIS WARRANTY DOES NOT COVER: 1.
Copyright 2022 by Supertech S. Corporation. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Supertech S. Corporation. For further information or if you have any questions, please contact: SUPERTECH S. CORP. Customer Service: (844) 846-9344 Email: support@trailervalet.com W W W.TRAILERVALET.
