Full Product Manual
Operating Instructions
9
Using the Coupling Plate
.
Your Trailer Valet comes with a coupling plate that, when
installed correctly, can keep the locking nut of the XL flush
with the coupler, which in turn reduces the possibility of
damage on the coupler should the XL pivot due to excess
horizontal force.
Step 1: DETACH THE BALL FROM THE LOCKING NUT
Slip the plate under the ball and over the threads as
shown. The hole of the plate should allow the ball to nest
inside it.
Step 2: INSERT THE PLATE
With the plate just underneath the ball, screw in place the
ball into the locking nut. Re-aach the locking nut to the
Trailer Valet and secure it with the coer pin, if you have
not done so. Then follow Step 3 in the “Geng Started”
secon to li the locking nut and aach the ball to the
coupler.
Step 3: RE-INSERT INTO THE LOCKING NUT