Instructions / Assembly
8
Operating Instructions
ACTIVATING AND PAIRING THE RVR WITH THE REMOTE CONTROL
The RVR comes pre-paired with the remote control.
- Turn on the RVR by pressing the Start/Stop button located on the front of the RVR.
- Turn on the remote control by pushing the forward button ( ) once.
- The RVR is now ready to use.
RE-PAIRING THE RVR
1. Turn on the Remote Control by pushing the Forward button ( ) once. The green light on the
Remote Control will turn on.
2. Turn on the RVR by clicking the Start/Stop button. The green light on the RVR will turn on.
3. Now simultaneously press and hold the Turn Right button ( ) on the Remote Control
and press and hold the Start/Stop button on the RVR, both LED lights start to blink for 8
seconds, after which the LED lights will light constantly. Now the RVR and Remote Control
have been re-paired and are ready to use. If this pairing procedure is unsuccessful, the Remote
procedure from step 1.
The start/stop button and operating status indicator
The battery indicator shows the RVR’s remaining battery status.
If the level is too low, the RVR may not respond correctly.
If the indicator itself weakens, the remote control batteries need to be replaced for the RVR to
respond correctly.
Forward: ( );Turn right: ( )
Backward: ( );Turn left: ( )
Operating
Status
Battery Indicator
IMPORTANT
Start/Stop
Button