Instructions / Assembly
operating instructions
10
MANEUVERING THE RVR
The Trailer Valet logo on the remote control must always point toward the RVR. Use both hands
on the remote control, and hold horizontally during use.
- Forward: To move forward, in the same direction as the antenna, hold down forward button ( ).
- Backward: To move backward/reverse, hold down the back button ( ).
- Turn: To turn, hold down the forward ( ) or backward ( ) button while at the same time holding
down one of the turn buttons of the remote control to turn right ( ) or left ( ). The RVR
- Stop: To stop the RVR from moving, simply release the forward or backward button.
NOTE: If your trailer has built-in brakes, they must be disengaged prior to operation of the Trailer
Valet. Consult your trailer manufacturer’s manual/instructions on temporary brake release. If this
is not available to you, please contact Trailer Valet Customer Support through phone or email for
assistance.
DEACTIVATING THE RVR
button ( ) at the same time.
DETACHING THE RVR
It is important that you always detach the RVR after use and place it in the storage box/bag
together with the remote control.
trailer brake or place wheel chucks and adjust your trailer jack so that the trailer is slightly
If mounted with the bracket, remove the cotter ring and use the remote control to move the RVR
If mounted with the hitch ball, loosen the hitch locking nut before releasing the coupler latch.
Raise the trailer tongue above the hitch and use the remote to move the RVR away from the trailer.
WARNING! Never leave the RVR mounted to the trailer while towing the trailer behind a vehicle.