Installation Guide

TRAILER VALET RVR5 w/ BALL TOWER
Quick Start Guide
Check trailer height and set up
hitch ball and base. Ensure
installation is on a at surface.
Fit the Base Tower into the slot
on the top of the RVR and
secure with the four included
screws.
1. 2.
Turn on RVR by press the start/stop
button located on the front of the
RVR. Turn on the remote control by
pushing the forward button once
(hold for a few seconds)
3.
To start maneuvering,
simultaneously press and hold
forward/backward and right/left
buttons.
Attach the hitch ball w/ ball base
to the coupler and tighten - Don’t
forget your spanner wrench and
tighten that locking nut.
5. 6.4.
Scan the QR code to access some helpful
videos to help you get started and
#MoveForward.
To use the RVR with a drill, read the manual for
step-by-step instructions. For supporting documents,
visit us at support.trailervalet.com.
NOTE: Make sure that unit is fully charged. First charge at least 6-8 hrs.
Using your trailer jack, lower the
hitch towards the unit’s rotating
coupler and attach a rotation pin
to secure and start moving!
FRONT OF RVR REMOTE CONTROLCOMPLETE
HITCH
BALL
COUPLING
PLATE
BALL BASE
LOCK
4.
Check that you have all your parts and accessories.
BASE TOWER
SCREWS (4X)REMOTE CONTROL
BALL BASE
HITCH BALL
ROTATION PIN
SPANNER WRENCH
MANUALBATTERY CHARGER
COUPLING PLATE
V1 V2
RVR5 UNIT