Full Product Manual
7
Activating and Pairing the RVR with the remote control
The RVR comes pre-paired with the remote control.
- Turn on the RVR by pressing the Start/Stop button located on the front of the RVR.
- Turn on the remote control by pushing the forward button () once.
- The RVR is now ready to use.
The start/stop button
and operating status indicator
(The diode lighting can be difficult to see in strong sunlight):
Forward: (
);Turn right: (
)
Backward: (
);Turn left: (
)
The battery indicator shows the RVR’s remaining battery status.
If the level is too low, the RVR may not respond correctly.
If the indicator itself weakens, the remote control batteries need to be replaced for the RVR to
respond correctly.
IMPORTANT
Re-pairing the RVR
1. Turn on the Remote Control by pushing the Forward button () once. The green light on
the Remote Control will turn on.
2. Turn on the RVR by clicking the Start/Stop button. The green light on the RVR will turn
on.
3. Now simultaneously press and hold the Turn Right button () on the Remote Control
and press and hold the Start/Stop button on the RVR, both LED lights start to blink for 8
seconds, after which the LED lights will light constantly. Now the RVR and Remote
Control have been re-paired and are ready to use. If this pairing procedure is
unsuccessful, the Remote Control will turn off automatically in around 15 seconds, and
the user needs to redo the procedure from step 1.
Battery Indicator
Operating
Status
Start/Stop
Button