BLACKOUT - JACKS OPERATING MANUAL A S BOLD A S YOU ARE
OPERATING MANUAL WARNING Carefully read and understand all the instructions before connecting your new Jack. Failure to follow these guidelines may result in serious injury to persons and property for which Blackout will not be held liable. Do not allow persons to operate or assemble this jack until they have read this manual and have developed a thorough understanding of how the jack works. SAVE THESE INSTRUCTIONS TABLE OF CONTENTS WARNING & TABLE OF CONTENTS.............................................
IMPORTANT SAFETY INFORMATION Failure to heed these markings may result in personal injury and/or property damage: 1. DO NOT leave your trailer free standing without the use of wheel chocks. 2. DO NOT submerge the jack in water (salt or fresh) or leave it in water for prolonged periods, since this can damage the gears and erode lubricants. 3. Carefully read all instructions.
OVERVIEW SPECIFICATIONS PART # BSJBSW06 BSJBSW08 BSJBSW15 BSJBTW14 BSJCSW13 BSJCSW17 BSJCTW05 BSJCTW18 BSJPSW02 BSJPSW04 BSJPSW07 BSJPSW10 BSJPSW16 BSJPTW12 BSJSSW01 BSJSSW11 BSJSTW03 BSJWSW09 CAPACITY 5K lbs - Side Wind 7K lbs - Side Wind 5K lbs - Side Wind 5K lbs - Top Wind 2K lbs - Side Wind 5K lbs - Side Wind 2K lbs - Top Wind 5K lbs - Top Wind 2K lbs - Side Wind 2K lbs - Side Wind 5K lbs - Side Wind 7K lbs - Side Wind 5K lbs - Side Wind 2K lbs - Top Wind 2K lbs - Side Wind 2K lbs - Side Wind 2K lbs -
ASSEMBLY Prior to install, raise the trailer tongue until you have adequate space to attach the jack. The unit must be attached while the weight of the trailer is supported by an existing support or tow vehicle. Having wheel chocks in place during connection will insure a safe install. It is recommended that you make sure the jack will have necessary clearance from the ground to operate and rotate into the stow position.
ASSEMBLY CIRCLE FRAME CENTER MOUNT INSTALLATION STEP 1. With the footplate detached, drop the jack into the hole located in the trailer’s coupler. Note that the support plate on the jack has one point that is flattened. This corner should face forward, toward the front of the coupler. STORING THE DEVICE After use, lower your jack until your trailer frame sits level. If storing, ensure that the trailer frame is jacked to level height.
LIMITED MANUFACTURER’S WARRANTY SuperTech S Corp warrants for one year from the purchase date that the product will be in working condition and will be free from manufacturing defects, provided that installation and use of the product is in accordance with product instructions. This warranty is only made to the original consumer purchaser and is non-transferable. ALL OTHER WARRANTIES IMPLIED OR EXPRESSED ARE HEREBY DISCLAIMED. THIS WARRANTY DOES NOT COVER: 1.
Copyright 2021 by Supertech S. Corporation. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Supertech S. Corporation. For further information or if you have any questions, please contact: SUPERTECH S. CORP.
