User's Manual

3
Adhere the monitor to the dash.
Remove license plate screws on your vehicle
and install the QuickVu™ camera over
existing license plate. Screw the camera and
license plate into place with existing screws.
Your installation is now complete!
Plug the DC power cable into the vehicle’s
power outlet (or cigarette lighter
receptacle).
Peel the protective backing from the
adhesive on the base of the monitor stand.
Plug the DC power cable securely into the
monitor’s power cord.
Your QuickVu™ system comes with all you
need: camera, monitor, and DC power cable.
Installation Instructions
1
1
Before permanently mounting the monitor, test the reception of the camera signal in the desired location.
You may find that one location may have better reception than another. Choose a location with good
reception that is still visible and within easy reach.