FAQ

Table Of Contents

Broadloom Carpet

Broadloom defined as carpet manufactured in a roll format.

10.0

Carpet Seaming

All seams must be properly prepared in strict compliance with carpet manufacturer

recommendations.

10.1

Trimming

Carpet seams must be trimmed using tools and techniques best suited for the carpet style

(e.g., loop-pile, cut-pile, cut-and-loop pile). Refer to Table I – Tools & Materials at the end

of this document. Trim edges far enough into the material to maintain the structural

integrity of the carpet and to seam without gaps or overlaps.

NOTE: Although “row-cutting” both edges is preferred, other trimming techniques may be

more suitable on some carpet. Many carpets do not lend themselves to all methods of

cutting. Trimming too far into patterned carpet will compromise pattern match. Contact

carpet manufacturers for specific seaming methods.

10.2

Sealing Edges/Seams

All seams must be sealed unless otherwise specified by the manufacturer. Regardless of

installation method, most carpet requires an edge protective material be introduced

between the edges to be joined. This material can be a liquid or thermoplastic and can be

applied using various procedures and techniques.

10.2.1

Edge Sealing

For carpet backings that require edge sealing, apply an appropriate seam adhesive

covering the thickness of the primary and secondary backing without contaminating face

yarns on both edges of the seam. This ensures that all edges trimmed for seaming are

protected from edge ravel. Allow seam adhesive to dry before proceeding with the

installation to prevent transfer to the face yarn.