Installation Guide
Note from manufacturer: Due to efficient and tight packaging yarn
needs to rest and fully open before connecting tiles for best
experience. Notice the direction of pile once the tiles are removed
from factory packaging. Brush the yarn out by hand in the opposite
direction of pressed pile nap. This would straighten the yarn out
faster; recommended rest time is 24-48 hours. You may speed up
the process by brushing the yarn more frequently to allow yarn to
relax before making the connections. This will ensure a tight fit and
straight/plush pile for you to enjoy.
**PLEASE SEE IMAGES BELOW THAT OUTLINE
INSTALLATION/ASSEMBLY AND DISASSEMBLY OF INTERLOCKING
GRASS TILES. INSTRUCTION IMAGES SLIGHTLY VARY AS ACTUAL
INTERLOCKING TABS ARE SHOWN BELOW (NOTICE THE MALE AND
FEMALE TABS). PLEASE BE SURE TO LOOK AT THE VIDEOS ON
PRODUCT PAGE FOR ADDITIONAL DIRECTIONS:
https://www.homedepot.com/p/TrafficMASTER-Artificial-Grass-
Interlocking-Tiles-1-ft-x-1-ft-9-case-48859/312457738
(ACTUAL TABS BELOW)
AFTER ALLOWING YARN TO REST AND OPEN UP, THE PILE MAY STILL
LEAN/POINT SLIGHTLY TO ONE DIRECTION. LINE UP THE GRASS
STRANDS AS CONSISTENT AS POSSIBLE - PLEASE SEE BELOW:
IT MAY BE EASIER TO INTERLOCK IF THE PILE IS FACING DOWN vs
UP, GIVING YOU BETTER VISIBILITY ON THE INTERLOCKING TABS.
WHEN LOCKING THEM IN, PLEASE ENSURE THAT YARN IS NOT
CAUGHT IN BETWEEN THE SEAMS.
FRIENDLY REMINDER: YOU MAY LOOK AT THE VIDEOS ONLINE FOR
INSTALLATION TIPS.
ADDITIONAL VIDEOS OF WATER DRAINAGE AVAILABLE AS WELL.
INTERLOCKED TILES FROM REAR VIEW: NOTICE THE SEAMS
BETWEEN THE TABS, THEY DO NOT HAVE ANY YARN STUCK IN
BETWEEN FROM THE FRONT/FACE OF THE TILE – THIS ENSURES A
AN EVEN / FLUSH FIT.


