Use and Care Manual

Correct
 Tapping the top of SimpleFit®
Locking Strip using a light rubber
mallet to ensure the plank/tile is
resting flat on the floor with no gaps
 Using a tapping block down the long
side of the plank/tile to ensure a gap-
free installation
Incorrect
 Using a regular hammer to tap in the
SimpleFit® Locking Strip as this will
damage the product
 Tapping the product in from the short
side as this will cause damage to the
Simplefit® Locking Strip
If you have any problems or questions, please call our Customer Help Line at 1-866-843-8453