Instructions / Assembly

READ THE MANUAL BEFORE OPERATING
SECTION ONE: ASSEMBLY INSTRUCTIONS
INTRODUCTION
Congratulations on your purchase of this Traeger Wood Pellet Grill, Model TFS60LZC.
With proper set-up, operation and maintenance, the Grill will provide you with delicious food
and with years of cooking enjoyment.
Assembly of the grill is required. Follow the assembly instruction provided in the TFS60LZC
packaging. Removal of the Porcelain Grills, Drip Pan, Heat Baffle, and Grease Bucket will
be required for initial firing and whenever the Grill runs out of pellets along with periodic
maintenance. Here are the instructions on removal and replacement for these items.
Removal Instructions:
Open the Lid on TFS60LZC.
Remove the Porcelain Grills (3 pieces) and set aside. Remove middle porcelain grill first.
Remove the Drip Pan and set aside.
Remove the Heat baffle from the holders and set aside.
Open the right lower door and take the grease Bucket from the Drain hook and set aside.
Installation instructions:
Insert the heat baffle into the fire box aligning the notches in the heat baffle with the cutouts
in the baffle supports. (See figure A)
FIGURE A