Instructions / Assembly
Parts:
A
B C D
E
V
ADIRONDACK CHAIR
Assembly Instructions
Letter
Part
Qty
A
Seat Panel
1
B
Back Panel
1
C
Arms
2
D
Legs
2
E
Screws w/ nut and washers
6
F
Anchor Screws
6
Place the Seat panel onto the ground preferably carpet
to avoid scratches. Using four screws with nuts and
washers attach the two legs to each side as shown.
Make sure there is a washer on each side of the wood
when attaching for proper fastening.
Next, attach the arms to the legs in step 1, using two
screws with nuts and washers. Aer you’ve fastened
the screw allow the arms to sag down and rest on the
seat panel as shown.
Next, attach the Back panel to the Seat panel using four
anchor screws. Make sure to hold the top end of the panel
upright so the wood doesn’t break. Once the four lower
screws are inserted, attach the arms to middle of the
Back Panel using two more anchor screws.
IMPORTANT:
Do not over tighten the screws
as this will cause the wood to split.
STEP 1
STEP 2
THANK YOU FOR YOUR PURCHASE.
WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT.
IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED, PLEASE CONTACT OUR OFFICE AT
1-800-906-1639.