Specifications
Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29
PRODUCT SPECIFICATIONS
In-Line Blower / Ventilator
Professional Series Models:
Model
Weight
Amps
CFM
PSX006XL
12 lbs
1.26
392
PSD008XL
19 lbs
2.99
836
PSD010XL
21 lbs
4.84
1266
Description
Featuring a galvanized steel housing with a powdercoat finish, Trade-Wind
®
In-Line Blowers are designed to be installed “in-line”
with a Trade-Wind
®
or comparable wood hood liner. These fans are specifically designed to provide efficient, high velocity air
movement by combining the best elements of high flow axial designs with the power of a centrifugal squirrel cage blower.
Direct Drive motor construction eliminates the need for continuous belt alignment, tension adjustments and maintenance.
Dimensions
Model
A
B
C
D
PSX006XL
6”
13 ¼”
6 ½”
8 ¼”
PSD008XL
8”
12 ½”
7”
15 ½”
PSD010XL
10”
14”
8”
15”
Side View
Typical Installation
Installation Considerations
(This applies to Illustration on the Left)
Trade-Wind
®
In-Line Blower Mechanism (K), Duct Silencer (I),
Damper (E) and two Fast Clamps (H) which are placed on
each side of the Duct Silencer (I). This picture illustrates the
required progression but the orientation can /will vary. In other
Words, although the In-Line Blower and Duct Silencer in this
illustration are in a horizontal position, they can be installed at
any angle. Attic installations are highly recommended.
Note: In the illustration (left): F is the ducting elbow; G is the
duct pipe of some variable length for specific application;
J is the same as G but on the other side of the Duct
Silencer (I); and L is the Roof Cap or Wall Cap that is
to be sized the same sq in opening as duct pipe. The
A, B, C, and D are the specifications dictated by the
the customer's Designer or Builder...
To ensure the overall ventilation system operates as designed,
please carefully review the Installation Instructions included
with the individual products. These guidelines are the
manufacturer’s suggestions. Always observe local, municipal
and state building codes.
Above specifications apply to picture on right >