Datasheet

ManualsBrandsTRACOPOWER ManualsRack & DIN Rail Mount PSUsRail mounted PSU (DIN) 24 Vdc 5 A 120 W 1 x

www.tracopower.com Page 1 of 9

Industrial Power Supplies

TSPC Series, 50–480 Watt

u Rugged metal case for harsh industrial

environments

u Industrial operating temperature

range: –25°C to +70°C

u Overload and and overtemperature

protection

u Power boost up to 120 %

u Power-Good signal

u Shock and vibration proof

u International safety approval package

u ATEX certiﬁcation for hazardous

locations

u Decoupling module for redundant

operation (optional)

u Wall mounting (opt.)

u 3-year product warranty

The TSPC series are high performance DIN-rail mount power supplies for harsh indus-

trial environments. The design is based on the popular TRACOPOWER TSP series but

with reduced electrical features to make these power supplies an easy to install and

cost efﬁcient but reliable solution for basic applications.

Excellent electrical speciﬁcations and high immunity against electrical disturbances

makes these compact modules the best choice for reliable industrial systems and ma-

chines.

For system applications all models provide a Power-Good signal.

The TSPC series power supplies complies with the latest safety and EMC standards for

industrial environments and include ATEX EN 60079 certiﬁcation for applications in

hazardous locations.

Order code Output power

nominal

Output voltage

nominal

Output current

nominal

TSPC 050-112 50 W 12 VDC 4.0 A

TSPC 050-124HL* 50 W 24 VDC 2.1 A

TSPC 050-124 50 W 24 VDC 2.1 A

TSPC 080-112 80 W 12 VDC 6.6 A

TSPC 080-124 80 W 24 VDC 3.3 A

TSPC 120-124 120 W 24 VDC 5.0 A

TSPC 120-148 120 W 48 VDC 2.5 A

TSPC 240-124 240 W 24 VDC 10 A

TSPC 240-148 240 W 48 VDC 5.0 A

TSPC 480-124 480 W 24 VDC 20 A

TSPC 480-148 480 W 48 VDC 10 A

Models

Scheme

NKAA

EMC

LVD

IEC

60950-1

UL 60950-1 UL 508 ATEX II3GEN 60950-1

EN 61558

EN 60204

*Additionally complies with UL hazloc

Summary of content (9 pages)

PAGE 1
Industrial Power Supplies TSPC Series, 50–480 Watt CB Scheme u Rugged metal case for harsh industrial EMC LVD environments IEC 60950-1 NKAA UL 60950-1 EN 60950-1 EN 61558 EN 60204 UL 508 ATEX II3G u Industrial operating temperature range: –25°C to +70°C u Overload and and overtemperature protection u u u u u Power boost up to 120 % Power-Good signal Shock and vibration proof International safety approval package ATEX certification for hazardous locations u Decoupling module for redundant opera
PAGE 2
Industrial Power Supplies TSPC Series 50–480 Watt Input Specifications Input voltage – nominal ranges TSPC 050 other models – effective ranges TSPC 050 other models – output power derating at input <100 VAC 100 – 240 VAC universal input 100 – 120 / 220 – 240 VAC by selection switch 85 – 264 VAC universal input 85 – 132 / 187 – 264 VAC by selection switch 3.3 %/V Input voltage frequency 47 – 63 Hz Harmonic limits EN 61000-3-2 Holdup time 10 ms min.
PAGE 3
Industrial Power Supplies TSPC Series 50–480 Watt General Specifications Pollution degree 2 Altitude during operation 2‘000 m max. Temperature coefficient 0.02 %/K Reliability, calculated MTBF at +25°C acc. to IEC 61709 – TSPC 080 – TSPC 120 – TSPC 240 – TSPC 480 2.4 Mio. h 2.5 Mio. h 1.7 Mio. h 1.4 Mio. h Isolation according to IEC/EN 60950-1, UL 60950-1, UL 508 Safety standards – Information technology equipment IEC/EN 60950-1, UL 60950-1, CSA 22.
PAGE 4
Industrial Power Supplies TSPC Series 50–480 Watt Outline Dimensions TSPC 050-112 TSPC 050-124(HL*) 5.0 (0.20) 87.0 (3.56) 45.0 (1.50) 35.5 (1.45) DC ON 78.0 (3.07) 110.0 (4.33) O/P Adjust 25.0 (0.98) 5.25 (0.21) GND (DC-OK) DC-OK *TSPC 050-124HL contains mating plug on DC-OK connector fitted with cable tie which enlarges height of product 9mm max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.
PAGE 5
Industrial Power Supplies TSPC Series 50–480 Watt Outline Dimensions TSPC 080-112 TSPC 080-124 Input Voltage Range Select 230 40.0 (1.57) 5.0 (0.20) 45.0 (1.50) - - ++ 110.0 (4.33) DC ON 78.0 (3.07) 110.0 (4.33) O/P Adjust N 25.0 (0.98) L 7.5 (0.30) GND (DC-OK) DC-OK Weight: 400 g (14.1 oz) Dimensions in [mm], ( ) = Inch Tolerances: ±0.5 mm (±0.02) www.tracopower.
PAGE 6
Industrial Power Supplies TSPC Series 50–480 Watt Outline Dimensions TSPC 120-124 TSPC 120-148 Input Voltage Range Select 230 46.0 (1.81) 5.0 (0.20) 45.0 (1.50) - - ++ 110.0 (4.33) DC ON 78.0 (3.07) 110.0 (4.33) O/P Adjust N L 25.0 (0.98) 10.5 (0.41) GND (DC-OK) DC-OK Weight: 500 g (17.7 oz) Dimensions in [mm], ( ) = Inch Tolerances: ±0.5 mm (±0.02) www.tracopower.
PAGE 7
Industrial Power Supplies TSPC Series 50–480 Watt Outline Dimensions TSPC 240-124 TSPC 240-148 Input Voltage Range Select 230 60.0 (2.36) 5.0 (0.20) 45.0 (1.50) - - ++ 110.0 (4.33) DC ON 78.0 (3.07) 110.0 (4.33) O/P Adjust N L 25.0 (0.98) 17.5 (0.69) GND (DC-OK) DC-OK Weight: 750 g (26.5 oz) Dimensions in [mm], ( ) = Inch Tolerances: ±0.5 mm (±0.02) www.tracopower.
PAGE 8
Industrial Power Supplies TSPC Series 50–480 Watt Outline Dimensions TSPC 480-124 TSPC 480-148 DC-OK GND (DC-OK) 150.0 (5.91) 115.0 (4.53) 78.0 (3.07) 110.0 (4.33) 45.0 (1.50) 5.0 (0.20) DC ON O/P Adjust N - - + + L 100.0 (3.94) Input Voltage Range Select 230 25.0 (0.98) 12.5 (0.49) Weight: 1950 g (68.8 oz) Dimensions in [mm], ( ) = Inch Tolerances: ±0.5 mm (±0.02) www.tracopower.
PAGE 9
Industrial Power Supplies TSPC Series 50–480 Watt TSP–WMK Wall Mounting Bracket order code for models content of kit TSP-WMK03 TSP-WMK02 TSPC 080, TSPC 120, TSPC 240, TSP-DCM600 TSPC 480 1 bracket 2 brackets 85.0 (3.35) TSP-WMK03 42.5 (1.67) 34.5 (1.36) 34.5 (1.36) R 2.12 (0.083) 7.0 (0.28) 15.0 (0.59) 74.0 (2.91) 25.0 (0.98) 25.0 (0.98) 2.0 (0.08) 37.0 (1.45) 55.0 (2.16) 4 x positioning holes 2.0 (0.08) 2.0 (0.08) R 2.12 (0.083) TSPC 080 TSPC 120 TSPC 240 2.0 (0.08) ø 4.25 (0.