Datasheet

http://www.tracopower.com Page 6 of 13
TSP–REM360 Redundancy Module
Industrial Power Supplies
TSP Series 90–600 Watt
With this module and two power supplies of the TSP series (90, 180 and 360 W
models) a highly reliable, true redundant power system can be configured without
any additional components. This module enforces the equivalent sharing of the out-
put current by each power supply. The system is fully redundant and provides the
output power even if one power supply has completely failed e.g. by short circuit on
the output. In the event of either, one power supply failing or being disconnected,
the second unit will automatically supply the full current to the load. The redundancy
of the system is monitored and if lost, indicated by an alarm output. The inputs are
hot swappable and can be loaded up to 15A each.
Order code
(includes terminal plugs)
Input Max Power
per Input
Output Voltage
adjust
Output Power
max.
TSP–REM360
2 x 24 VDC
2 x Control input
2 x 360 W
24 VDC
(24 - 27 VDC)
360 W
Models
Function Diagram Connector Positions
REM Controller
TSP
TSP
Volt adjust
Output
Load
Alarm
DC IN 1
+
_
J1.2
J1.1
J3.1
J3.2
DC IN 2
+
_
J1.4
J1.3
J4.1
J4.2
J5.1 J5.2
J2.2
J2.1
J2.4
J2.3
+
_
Remote
Link 2
Redundancy
ok
Remote
Link 1
Remote On/Off
J5.3 J5.4
Power
Supplies
Front view Bottom view Top view
Output
- - + +
DC IN 1
- + - +
DC IN 2
Remote Link 1
Remote Link 2
Alarm
Remote On/Off
Specifications
Operating temperature – 25°C...+70°C max. (–13°F...+158°F)
derating above 40°C (104°F): 1.5%/K
Electromagnetic compatibility in correspondence to connected units (no internal
switching device)
Redundancy OK signal (Alarm) trigger threshold at 18...22VDC,
contact open if both inputs failed
Dimensions same as model TSP 090 (see page 10)
Remote link cable (0.5m) 2 cables included with TSP-REM360 module
Remote On/Off by ext. contact: contact open = On, contact closed = Off
Installation instructions
www.tracopower.com/products/tsp-rem_inst.pdf