Datasheet

ManualsBrandsTRACOPOWER ManualsRack & DIN Rail Mount PSUsRail mounted PSU (DIN) 48 Vdc 2 A 96 W 1 x

http://www.tracopower.com Page 8 of 13

Industrial Power Supplies

TSP Series 90–600 Watt

TSP–BCM24 Battery Controller Module

This module provides a professional battery management system to charge and

monitor an external lead-acid battery. Together with a power supply of the TSP

series a perfect DC-UPS system can be conﬁgured. The connected battery will be

charged and held in charged mode by the power supply. In case of a mains power

failure the battery will supply the output power until the battery is discharged. As a

consequence, the output voltage of the system is equivalent to the battery voltage.

To avoid overcharging the battery, an external temperature sensor adjusts the bat-

tery voltage automatically to the required end of charge voltage. By this, the battery

life time can be extended.

The battery is protected against deep discharge. Mains power and the battery

status are checked and monitored continuously and failures are indicated by corre-

sponding LED’s and alarm outputs. The module provides also an external On/Off

input to switch-off both, power supply and battery.

Order code

(includes terminal plugs)

Inputs Input Power

max

Output Voltage

nom.

*Output Power

max.

TSP-BCM24

24 VDC Power Supply

and 24 VDC Battery

360 W

24 VDC 360 W

Models

*reduce max. output current by battery charging current

Function Diagram Connector Positions

Battery Controller

TSP

Temp.

Sensor (TS)

Volt adjust

Output

Load

DC-OK

J1.2

J1.1

J3.1

J3.2

J5.1 J5.2

J2.2

J2.1

J2.4

J2.3

DC IN

Remote

Link

24V Battery

BAT.-OK

J5.3 J5.4

DC-OK

out

J5.5 J5.6

Remote

On/Off

J5.7 J5.8

Fuse

J5.9 J5.10

J1.4

J1.3

Power

Supply

Front view Bottom view Top view

AC OK

Bat. OK

DC OK

Temp. Sensor

(TS)

DC IN Battery

Output

- -

+ +

Remote Link

Remote On/Off

Specifications

Operating temperature – 25°C...+70°C max. (–13°F...+158°F)

derating above 40°C (104°F): 1.5%/K

Electromagnetic compatibility in correspondence to connected units (no internal

switching device)

Battery protection over voltage, deep discharge, overcharge, short circuit-

and revers connection (built-in fuse)

Status signals DC-OK input, DC-OK output, BAT OK

all relay contact closed at status OK

Rating per relay contact 30 VDC / 1.0 A max.

Dimensions same as model TSP 090 (see page 10)

Remote link cable (0.5m) 1 cable included with TSP-BCM24 module

Remote On/Off by ext. contact: contact open = On, contact closed = Off

Installation instructions