Data Sheet

Standby Power Source
- Output Voltage
5 VDC
- Output Current
2000 mA max.
Altitude During Operation
5'000 m max.
Switching Frequency
55 - 85 kHz (PFM)
Insulation System
Reinforced Insulation
Working Voltage (rated)
312 VAC
Isolation Test Voltage
- Input to Output, 60 s
5'657 VDC
- Input to Case or PE, 60 s
3'535 VDC
- Output to Case or PE, 60 s
3'535 VDC
Isolation Resistance
- Input to Output, 500 VDC
100 MOhm min.
Leakage Current
(264 VAC)
- Touch Current
100 µA max.
Reliability
- Calculated MTBF
410'000 h (MIL-HDBK-217F, ground benign)
Environment
- Vibration
IEC 60068-2-6
- Mechanical Shock
IEC 60068-2-27
Connection Type
JST
Weight
462 g
Power OK Signal
Open collector output
- Power OK
Low level
- Power Off
High resistance
(Refers to 'PG' Pin)
- Pin Specifications
50 VDC / 50 mA / 120 mW max.
Remote Control
- Voltage Controlled Remote
On: 3.0 to 12 VDC or open circuit
Off: 0 to 1.2 VDC or short circuit
Refers to '+Remote' and '-Remote' Pin
- Remote Pin Input Current
-0.5 to 1.0 mA
(Standby power source is always present)
Environmental Compliance
- Reach
www.tracopower.com/info/reach-declaration.pdf
- RoHS
www.tracopower.com/info/rohs-declaration.pdf
Supporting Documents
Overview Link (for additional Documents)
www.tracopower.com/overview/tpp450a
TPP 450A Series, 450 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
June 4, 2019
Page 4 / 5