Datasheet

Relative Humidity
95% max. (non condensing)
Temperature Ranges
–40°C to +85°C
–40°C to +85°C
Power Derating
Depending on model
4 %/V below 90 VAC
See application note:
www.tracopower.com/overview/tpp15-d
Cooling System
Natural convection (20 LFM)
Altitude During Operation
5'000 m max.
Switching Frequency
75 - 95 kHz (PWM)
Insulation System
Reinforced Insulation
Working Voltage (rated)
250 VAC
Isolation Test Voltage
4'000 VAC
1'500 VAC
1'500 VAC
Creepage
8 mm min.
Clearance
8 mm min.
Isolation Resistance
100 min.
Leakage Current
(at 264 VAC)
75 µA max.
Reliability
3'100'000 h (MIL-HDBK-217F, ground benign)
Washing Process
According to Cleaning Guideline
www.tracopower.com/info/cleaning.pdf
Environment
IEC 60068-2-6
5 g, 3 axis, sine sweep, 3x30 min, 5-500 Hz
IEC 60068-2-27
50 g, 3 axis, 11 ms
Potting Material
Silicone (UL 94 V-0 rated)
Pin Material
Copper
Pin Foundation Plating
Nickel (2 - 3 µm)
Pin Surface Plating
Tin (3 - 5 µm), matte
Housing Type
Plastic Case
Mounting Type
PCB Mount
Connection Type
THD (Through-Hole Device)
Soldering Profile
Lead-Free Wave Soldering
260°C / 6 s max.
Weight
43 g
Environmental Compliance
www.tracopower.com/info/reach-declaration.pdf
REACH SVHC list compliant
REACH Annex XVII compliant
www.tracopower.com/info/rohs-declaration.pdf
Exemptions: 7a, 7c-I
(RoHS exemptions refer to the component
concentration only, not to the overall
concentration in the product (O5A rule).)
f178725e-c463-45fc-a49c-ad9112cf5e53
General Specifications
Supporting Documents
Overview Link (for additional Documents)
www.tracopower.com/overview/tpp15-d
TPP 15-D Series, 15 Watt
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 4 / 5