Datasheet

Input Current
5 Vin models:
45 mA typ.
12 Vin models:
100 mA typ.
(at Vout max.)
Start-up Voltage
5 Vin models:
2.2 VDC typ. / 2.4 VDC max.
12 Vin models:
7.9 VDC typ. / 8.3 VDC max.
Under Voltage Lockout
5 Vin models:
1.6 VDC min. / 2 VDC typ. / 2.2 VDC max.
12 Vin models:
6.5 VDC min. / 7.5 VDC typ. / 8 VDC max.
Reflected Ripple Current
5 Vin models:
35 mAp-p typ.
12 Vin models:
30 mAp-p typ.
(with input filter, see application note)
Recommended Input Fuse
5 Vin models:
8'000 mA (fast acting)
12 Vin models:
6'300 mA (slow blow)
(The need of an external fuse has to be assessed
in the final application.)
Input Filter
See application note:
www.tracopower.com/overview/tos06sil
Input Specifications
Output Voltage Adjustment
0.75 Vout models:
0.75 - 3.3 VDC
0.75 - 5.0 VDC
(By external trim resistor)
See application note:
www.tracopower.com/overview/tos06sil
(Vin must be at least 0.5 V higher than Vout)
Voltage Set Accuracy
±2% max.
Regulation
0.3% max.
0.4% max.
Ripple and Noise
50 mVp-p max.
Capacitive Load
3'000 µF max.
(ESR >10 mOhm)
Minimum Load
Not required
Temperature Coefficient
±0.4 %/K max.
Start-up Time
8 ms typ.
Start-up Overshoot Voltage
3% max.
Short Circuit Protection
Continuous, Automatic recovery
Output Current Limitation
210% typ. of Iout max.
Transient Response
130 mV typ. (50% Load Step) (5 Vin model)
200 mV typ. (50 % Load Step) (12 Vin model)
25 µs typ. (50% Load Step)
(with 1 µF MLCC || 10 µF TC)
Output Specifications
Safety Standards
UL 60950-1
UL 62368-1
Safety Specifications
Relative Humidity
95% max. (non condensing)
Temperature Ranges
–40°C to +85°C
+125°C max.
–55°C to +125°C
Power Derating
Depending on model
See application note:
www.tracopower.com/overview/tos06sil
Cooling System
Natural convection (20 LFM)
General Specifications
TOS 06SIL Series, 6 A
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 2 / 4