Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TON 15 Series 15 Watt
Outline Dimensions
Pin Single
1
+Vin (Vcc)
2
–Vin (GND)
3
+Vout
4 Trim
5 –Vout
6 Remote On/Off
Pin-Out
Rev. July 25. 2014
Dimensions in [mm], () = Inch
Tolerances: ±0.5 (±0.02)
Pin pitch tolerances: ±0.25 (±0.01)
thru hole version (TH)SMD version (SM)
8.5
(0.335)
27.94 (1.10)
8.5
5.2
(0.20)
(0.335)
20.32 (0.80)
3.81
(0.15)
7.62
(0.3)
23.88 (0.94)
10.16 (0.4) 10.16
(0.4)
5.08
(0.2)
12
345
6
Bottom view
0.5max.
(0.02)
1.3max.
(0.05)
Section A-A
A-A
0.8
(0.031)
General Specifications
Temperature ranges – Operating –40°C to +85°C (with derating)
– Storage 55°C to +125°C
Derating 6.7 %/K above 75°C
Humidity (non condensing) 5 % to 95 % rel H
Thermal shock acc. MIL-STD-810F
Vibration acc. MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.4 Mio. h
Isolation voltage (60 sec.) – Input / Output 2‘250 VDC (complies with basic insulation
rating per EN 60950-1)
Isolation resistance Input / Output >10 M Ohm
Isolation capacitance – Input / Output 1000 pF max.
Switching frequency 3.3 / 5 Vout models: 270 kHz typ.
(Pulse width modulation PWM) 12 / 15 Vout models: 470 kHz typ.
Remote On/Off – On: 3.0 to 15 VDC or open circuit.
Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2
– Off idle current: 2.5 mA max.
negative remote On/Off logic on demand
Safety standards UL 60950-1, EN 60950-1, IEC 60950-1
Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Weight 10.5 g (0.36oz)
Soldering profile for trough hole version max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Washing procedure www.tracopower.com/products/ton15-clean.pdf