Datasheet

EMI Emissions
- Conducted Emissions
EN 55032 class A (with external filter)
EN 55032 class B (with external filter)
- Radiated Emissions
EN 55032 class A (with external filter)
EN 55032 class B (with external filter)
External filter proposal:
www.tracopower.com/overview/tmr6
EMS Immunity
- Electrostatic Discharge
Air:
EN 61000-4-2, ±8 kV, perf. criteria A
Contact:
EN 61000-4-2, ±6 kV, perf. criteria A
- RF Electromagnetic Field
EN 61000-4-3, 10 V/m, perf. criteria A
- EFT (Burst) / Surge
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV, perf. criteria A
Ext. input component:
5 Vin models: Nippon chemi-con KY 330 µF
Other models: Nippon chemi-con KY 220 µF
- Conducted RF Disturbances
EN 61000-4-6, 10 Vrms, perf. criteria A
- PF Magnetic Field
Continuous:
EN 61000-4-8, 100 A/m, perf. criteria A
EMC Specifications
Relative Humidity
95% max. (non condensing)
Temperature Ranges
- Operating Temperature
–40°C to +78°C
- Case Temperature
+105°C max.
- Storage Temperature
–55°C to +125°C
Power Derating
- High Temperature
Depending on model
See application note:
www.tracopower.com/overview/tmr6
Cooling System
Natural convection (20 LFM)
Remote Control
- Current Controlled Remote
On: open circuit
Off: 2 to 4 mA current (internal 1 kΩ resistor)
External circuit proposal:
www.tracopower.com/info/current-remote.pdf
- Off Idle Input Current
2.5 mA max.
Altitude During Operation
5'000 m max.
Switching Frequency
100 kHz min. (RCC)
Insulation System
Functional Insulation
Isolation Test Voltage
- Input to Output, 60 s
1'600 VDC
Isolation Resistance
- Input to Output, 500 VDC
1'000 MΩ min.
Isolation Capacitance
- Input to Output, 100 kHz, 1 V
50 pF max.
Reliability
- Calculated MTBF
2'135'000 h (MIL-HDBK-217F, ground benign)
Washing Process
According to Cleaning Guideline
www.tracopower.com/info/cleaning.pdf
Environment
- Vibration
MIL-STD-810F
- Thermal Shock
MIL-STD-810F
Housing Material
Non-conductive Plastic (UL 94 V-0 rated)
Potting Material
Silicone (UL 94 V-0 rated)
Pin Material
Copper
Pin Foundation Plating
Nickel (2 - 3 µm)
Pin Surface Plating
Tin (3 - 5 µm), matte
Housing Type
Plastic Case
Mounting Type
PCB Mount
Connection Type
THD (Through-Hole Device)
Footprint Type
SIP8
Soldering Profile
Lead-Free Wave Soldering
Weight
4.8 g
General Specifications
TMR 6 Series, 6 Watt
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 3 / 4