Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TMR 2E Series 2 Watt
Outline Dimensions
Pin
1
–Vin (GND)
2
+Vin (Vcc)
3
Remote On/Off
5
No con.
6
+Vout
7
–Vout
8
No con.
Pin-Out
Rev. March 24. 2016
General Specifications
Switching frequency 100 – 650 kHz (FM)
Remote On/Off – On: < 0.6 VDC (ref. to –Vin) or open circuit
– Off: 2.7 to 15 VDC (ref. to –Vin)
– Off control input current 1 mA max.
– Off idle current: 0.2 mA max.
Environmental compliance – Reach www.tracopower.com/overview/tmr2e
– RoHS directive 2011/65/EU
Physical Specifications
Casing material non-conductive plastic
Potting material epoxy (UL 94V-0 rated)
Weight 4.8g ( 0.17 oz)
Soldering temperature max. 260°C / 10 sec.
Dimensions in [mm], () = Inch
Tolerances: ±0.5 (±0.02)
Pin pitch tolerances: ±0.25 (±0.01)
No con. = Pin to be isolated
from circuitry
Bottom view
2.7
(0.11)
0.5
(0.02)
0.25
(0.01)
2.542.0 2.54
21.8
5.08 2.54
0.5
(0.02)
11.2
(0.44)
(0.1) (0.1) (0.1)(0.08) (0.2)
3.2
2.54
(0.1)
2.54
(0.1)
(0.86)
(0.13)
9.3
(0.37)
1235678
Application note: www.tracopower.com/products/tmr2e-application.pdf