Datasheet

Pollution Degree
PD 2
Over Voltage Category
OVC II
EMI Emissions
- Conducted Emissions
EN 55014-1 (internal filter)
EN 55032 class B (internal filter)
FCC Part 15 class B (internal filter)
- Radiated Emissions
EN 55014-1 (internal filter)
EN 55032 class B (internal filter)
FCC Part 15 class B (internal filter)
- Harmonic Current Emissions
EN 61000-3-2
- Voltage Fluctuations & Flicker
EN 61000-3-3
EMS Immunity
EN 55024 (IT Equipment)
EN 55035 (Multimedia)
EN 55014-2 (Household Appliances Tools)
- Electrostatic Discharge
Air:
EN 61000-4-2, ±8 kV, perf. criteria A
Contact:
EN 61000-4-2, ±6 kV, perf. criteria A
- RF Electromagnetic Field
EN 61000-4-3, 10 V/m, perf. criteria A
- EFT (Burst) / Surge
EN 61000-4-4, ±2 kV, perf. criteria A
L to L:
EN 61000-4-5, ±1 kV, perf. criteria A
- Conducted RF Disturbances
EN 61000-4-6, 10 Vrms, perf. criteria A
- PF Magnetic Field
Continuous:
EN 61000-4-8, 30 A/m, perf. criteria A
- Voltage Dips & Interruptions
230 VAC / 50 Hz:
EN 61000-4-11
30%, 25 periods, perf. criteria A
>95%, 0.5 periods, perf. criteria A
>95%, 250 periods, perf. criteria B
EMC Specifications
Relative Humidity
95% max. (non condensing)
Temperature Ranges
- Operating Temperature
–25°C to +70°C
- Approved Ambient Temp.
+50°C max.
- Case Temperature
+95°C max.
- Storage Temperature
–40°C to +85°C
Power Derating
- High Temperature
2.5 %/K above 50°C
See application note:
www.tracopower.com/overview/tmps10
Cooling System
Natural convection (20 LFM)
Altitude During Operation
2'000 m max.
Switching Frequency
30 - 65 kHz (PWM)
45 kHz typ. (PWM)
Insulation System
Reinforced Insulation
Working Voltage (rated)
244 VAC
Isolation Test Voltage
- Input to Output, 60 s
4'000 VAC
Isolation Resistance
- Input to Output, 500 VDC
1'000 MΩ min.
Leakage Current
- Touch Current
250 µA max.
Reliability
- Calculated MTBF
453'000 h (MIL-HDBK-217F, ground benign)
Washing Process
Not allowed
Housing Material
Plastic resin (UL 94 V-0 rated)
Potting Material
Silicone (UL 94 V-0 rated)
Pin Material
Copper Alloy (C6801)
Pin Foundation Plating
Nickel (2 - 4 µm)
Pin Surface Plating
Tin (3 - 5 µm), matte
Housing Type
Plastic Case
Mounting Type
PCB Mount
Connection Type
THD (Through-Hole Device)
Soldering Profile
Lead-Free Wave Soldering
260°C / 10 s max.
General Specifications
TMPS 10 Series, 10 Watt
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 3 / 4