Manualshelf

Datasheet

ManualsBrandsTracoPower ManualsAC DC PSU ComponentsAC/DC PSU (print) 2 A 10 W 5 V DC 1 pc(s)
1234
Input Voltage
Operational Range:
85 - 264 VAC (Full Range)
Rated Range:
100 - 240 VAC (Full Range)
Operational Range:
120 - 370 VDC (Designed for, no certification)
Polarity:
irrelevant
Input Frequency
Operational Range:
47 - 440 Hz
Certified:
50/60 Hz
Power Consumption
450 mW max.
150 mW max.
Input Inrush Current
40 A max.
20 A max.
Recommended Input Fuse
1'600 mA (slow blow)
(The need of an external fuse has to be assessed
in the final application.)
Input Specifications
Voltage Set Accuracy
±2% max.
Regulation
0.5% max.
1% max.
Boost Power
Output Current peak: See model table
Peak power time: 30 s max.
Peak power duty cycle: 10% max.
Average operation power: 10 W max.
Ripple and Noise
(20 MHz Bandwidth)
3.3 VDC model:
60 mVp-p max.
5 VDC model:
60 mVp-p max.
9 VDC model:
90 mVp-p max.
12 VDC model:
120 mVp-p max.
15 VDC model:
150 mVp-p max.
24 VDC model:
240 mVp-p max.
48 VDC model:
480 mVp-p max.
Capacitive Load
3.3 VDC model:
4'400 µF max.
5 VDC model:
2'200 µF max.
9 VDC model:
680 µF max.
12 VDC model:
390 µF max.
15 VDC model:
240 µF max.
24 VDC model:
100 µF max.
48 VDC model:
24 µF max.
Minimum Load
Not required
Temperature Coefficient
±0.02 %/K max.
Hold-up Time
40 ms min.
8 ms min.
Short Circuit Protection
Continuous, Automatic recovery
Overload Protection
Foldback Mode
Output Current Limitation
150% typ. of Iout max.
Overvoltage Protection
125% typ. of Vout nom.
(By Zener diode)
Output Specifications
Safety Standards
EN 62368-1
IEC 62368-1
UL 62368-1
EN 60335-1
IEC 60335-1
www.tracopower.com/overview/tmps10
Protection Class
Class I & II (Prepared): Reinforced Insulation
Safety Specifications
TMPS 10 Series, 10 Watt
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 2 / 4