Data Sheet

TMDC 06 Series, 6 Watt
www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Temperature ranges – Operating (at 20 LFM) –40°C to +92.5°C
– Case temperature +105°C max.
– Storage temperature –50°C to +125°C
Derating 4 %/K above 80°C
Cooling Natural convection (20 LFM)
Thermal impedance 3.1 K/W (at 20 LFM)
Humidity (non condensing) 95 % rel H max.
Isolation voltage – Input to Output, 60 s 3000 VDC
Isolation resistance – Input to Output, 500 VDC 1 GOhm min.
Isolation capacitance – Input to Output, 100 kHz / 1 V 2200 pF max.
Altitude during operation 5000 m
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 4‘100‘000 h
Switching frequency 370 kHz typ.
Remote On/Off Off: short circuit or 0 – 1.2 VDC (referred to -Vin pin)
On: open circuit or 3.5 – 12 VDC (referred to -Vin pin)
– Off idle current 2.5 mA typ.
– Remote pin input current ±0.5 mA max.
Safety standards – CB report IEC/EN/ UL 62368-1
– Certification documents www.tracopower.com/overview/tmdc06
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material plastic resin (UL 94V-0 rated)
Package weight 49 g
Soldering temperature max. 260°C / 10 s