Data Sheet

TMDC 06 Series, 6 Watt
www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 24 Vin models: 10 mA typ.
48 Vin models: 8 mA typ.
Surge voltage (1 s max.) 24 Vin models: 0.7 to 50 V max.
48 Vin models: –0.7 to 100 V max.
Start-up voltage 24 Vin models: 9 VDC (or lower)
48 Vin models: 18 VDC (or lower)
Startup time 30 ms typ.
Under voltage shut down 24 Vin models: 8 VDC typ.
48 Vin models: 16 VDC typ.
Input filter Internal Pi Type
EMC emissions – Conducted / Radiated input suppression EN 55032, class A (internal filter)
EMC immunity EN 55035
– ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, perf. criteria A
EN 61000-4-2, contact ±6 kV, perf. criteria A
– Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A
– Fast transient / burst immunity EN 61000-4-4, ±2 kV, perf. criteria A
– Surge immunity EN 61000-4-5, ±2 kV perf. criteria A
Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8, 100 A/m, perf. criteria A
Output Specifications
Voltage set accuracy ±2 % max.
Regulation – Input variation (Vin min. to max.) 0.5 % max.
– Load variation (0 – 100 %) 0.5 % max.
– Cross regulation (balanced load) dual output: 2.0 % max.
– Cross regulation (asym. load 25/100 %) dual output: 5.0 % max.
Temperature coefficient ±0.02 %/K max.
Minimum load not required
Ripple and noise (±)24 & 48 VDC models: 180 mVp-p typ.
(20 MHz Bandwidth) other output models: 75 mVp-p typ.
Transient response – Recovery time (25% load step change) 500 µs max.
– Response Deviation (25% load step change) ±5% max.
Over current limitation at 150 % typ. of Iout rated
Short-circuit protection Hiccup mode 0.3 Hz typ., automatic recovery
Capacitive load – Single output 5.1 VDC models: 680 µF max.
12 VDC models: 330 µF max.
15 VDC models: 330 µF max.
24 VDC models: 150 µF max.
48 VDC models: 68 µF max.
– Dual output ±12 VDC models: 150 µF max. (each output)
±15 VDC models: 150 µF max. (each output)
±24 VDC models: 68 µF max. (each output)