Data Sheet

ManualsBrandsTracoPower ManualsDIN Rail PSUsTracoPower TIB 240-148EX Rail mounted PSU (DIN) +48.0 V DC 5000 mA 240 W 1 x

www.tracopower.com Page 1 of 6

Industrial Power Supplies TIB 240EX Series, 240 Watt

• UL Hazloc Class I, division 2 approval

and ATEX certiﬁcation

• SEMI F47 compliant for voltage sag

immunity

• Rugged metal case with optional

side-mounting

• Very high efﬁciency up to 95%

• Back power immunity

• 150% peak current for 4 sec.

• Operating Temp –40°C to +70°C

(full load up to 60°C)

• Adjustable output voltage

• High Reliability: MTBF 1 mill hrs per

IEC 61709

• Short circuit and overload protection

• 5-year product warranty

The TIB 240-EX family of next generation of 240 Watt din rail power supplies

feature high efﬁciency operation of up to 95% enabling a slim design with al-

ternative side-mounting for ﬂat panels (DC OK Indicator on both front and

side panel). These products certiﬁed to UL Hazloc Class 1 / Div 2, and ATEX

(EN60079-0, EN60079-7. EN600079-15) for operation in hazardous locations.

These convection cooled power supplies have a -40°C to +60°C full load operat-

ing temperature range. 150% peak power for up to 4 seconds which is ideal for

stepper motors, solenoids or actuators. The TIB 080-EX series has an important

Back Power Immunity feature that helps protect against shut-down or malfunc-

tion with loads such as inductors and decelerating motors that can feed voltage

back to the power supply. Outputs are radio-interference-suppressed to impede

radiation at long output lines which reduces the common mode current to within

limits of telecommunication ports. The series operate with a high power factor

of up to 99% which also minimizes inrush current.

Additional qualiﬁcations include IEC/EN/UL 60950-1, UL508 and CB Report

with EMC compliance to IEC/EN61000-6-2 and IEC/EN61000-6-3.

UL508

Scheme

UL60950-1

ATEX II3G

Other output power of same series:

www.tracopower.com/overview/tib-ex

Order Code

Output Power

(max.)

Output Voltage

nom. (adjustable)

Output Current

(max.)

Efﬁciency

(typ.)

TIB 240-124EX

240 W 24 VDC (23.5–28.0) 10 A 95.0 %

TIB 240-148EX

240 W 48 VDC (47.0–56.0) 5 A 95.0 %

Models

Summary of content (6 pages)

PAGE 1
Industrial Power Supplies • • • • • • • • • • • TIB 240EX Series, 240 Watt UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up to 95% Back power immunity 150% peak current for 4 sec.
PAGE 2
TIB 240EX Series, 240 Watt Input Specifications Input voltage – nominal ranges 100 – 240 VAC – effective ranges 85 – 264 VAC (below 90 VAC a derating of 3%/V is required) Input voltage frequency 45 – 65 Hz Standby power cunsumption 2.3/2.3 W (115/230 VAC) Power Factor Correction (PFC) 0.98/0.92 (115/230 VAC) Harmonic limits – acc. EN 61000-3-2 class A, D Inrush current 15/30 A max. (115/230 VAC) Output Specifications Output voltage adjustment 1) 24 Vout models: 23.
PAGE 3
TIB 240EX Series, 240 Watt General Specifications Operating temperature range –40°C to +70°C max. Derating 2 %/K above +60°C Cooling convection cooling, no internal fan Overtemperature protection switch off at overtemperature Humidity (non condensing) 5–95 % rel. H max. Altitude during operation 2000 m max.
PAGE 4
TIB 240EX Series, 240 Watt Function Specification Output Characteristic Characteristic: Output voltage vs output current for overload conditions until switch off after 4 s at nominal input voltages All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.
PAGE 5
TIB 240EX Series, 240 Watt Output Characteristic (continued) Derating: max load vs input voltage 160 140 4 seconds Load [%] 120 continious 100 80 60 40 20 -40 30 40 50 60 Ambient Temperature [°C] 70 80 Derating: Load vs ambient temperature All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.
PAGE 6
TIB 240EX Series, 240 Watt Outline Dimensions * Measurement from front panel to DIN-Rail 118,6 ±1* 114,2 ±1 M3 Combi Head 48 ±1 6,35 24 VDC/10 A DC OK DC ON 124,2 ±1 V adj. Industrial Power Supply 240 W Model TIB 240-124EX 100-240 VAC, 50-60 Hz 2.89-1.27 A L 9,5 M3 Combi Head DIN-Rail Hook N Weight: 643g (22.68 oz) Alternative side mounting: 24 VDC/10 A DC OK DC ON DC DCON ON V adj. Industrial Power Supply 240 W Model TIB 240-124EX 100-240 VAC, 50-60 Hz 2.89-1.