Data Sheet

ManualsBrandsTracoPower ManualsDIN Rail PSUsTracoPower TIB 120-112 Rail mounted PSU (DIN) +12.0 V DC 10000 mA 120 W 1 x

www.tracopower.com Page 1 of 6

Industrial Power Supplies TIB 120 Series, 120 Watt

• Slim proﬁle, for DIN-rail mounting

• Alternative side-mounting

for ﬂat panels

• High power factor by active power

correction

• Very high efﬁciency up to 94.0%

• Back power immunity

• 150% peak current for 4 sec.

• Operating temperature range:

–40°C to +70°C max.

• Adjustable output voltage

• DC–OK indicator

• Short circuit and overload protection

• Class I, division 2 approval and

ATEX certiﬁcation for EX-models

• 5-year product warrenty for EX-models

This generation of DIN-rail power supplies combines the most efﬁcient circuit

topology with optimized cost/performance ratio for industrial environments and

for electrical control cabinets.

They have a very high efﬁciency of up to 94.0% which allows a very slim package

design. The output voltage is adjustable from –2% to +17%. The case offers the

potentially useful feature to ﬁx the DIN-rail clip to the side wall for the mounting

inside ﬂat panels. Over a period of minimum 4 seconds they can operate with a

boost power of 150%. The boost power facilitates the activation of stepper mo-

tors, solenoids or actuators. The units operate with a high power factor of up to

97% by active power factor correction which also keeps the input inrush current

low. The TIB series are also available with other nominal power of 80, 240 or

480 Watt (+50% boost power). They come with the safety standard approvals

for IEC/EN 60950-1, UL 60950-1 and UL 508.

UL508

Scheme

UL60950-1

ATEX II3G

Other output power of same series:

www.tracopower.com/overview/tib

Order Code

Output Power

(max.)

Output Voltage

nom. (adjustable)

Output Current

(max.)

Efﬁciency

(typ.)

TIB 120-112

120 W 12 VDC (11.8–15.0) 10 A 94.0 %

TIB 120-112EX

TIB 120-124

120 W 24 VDC (23.5–28.0) 5 A 94.0 %

TIB 120-124EX

TIB 120-148

120 W 48 VDC (47.0–56.0) 2.5 A 94.0 %

TIB 120-148EX

Models

Summary of content (6 pages)

PAGE 1
Industrial Power Supplies • • • • • • • • • • • • TIB 120 Series, 120 Watt Slim profile, for DIN-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.0% Back power immunity 150% peak current for 4 sec. Operating temperature range: –40°C to +70°C max.
PAGE 2
TIB 120 Series, 120 Watt Input Specifications Input voltage – nominal ranges 100 – 240 VAC – effective ranges 85 – 264 VAC (below 90 VAC a derating of 3%/V is required) Input voltage frequency 45 – 65 Hz Standby power cunsumption 2.2/2.2 W (115/230 VAC) Power Factor Correction (PFC) 0.97/0.8 (115/230 VAC) Harmonic limits – acc. EN 61000-3-2 class A, D Inrush current 15/30 A max. (115/230 VAC) Output Specifications Output voltage adjustment 1) 12 Vout models: 11.8 – 15.
PAGE 3
TIB 120 Series, 120 Watt General Specifications Operating temperature range –40°C to +70°C max. Derating 2 %/K above +60°C Cooling convection cooling, no internal fan Overtemperature protection switch off at overtemperature Humidity (non condensing) 5–95 % rel. H max. Altitude during operation 2000 m max.
PAGE 4
TIB 120 Series, 120 Watt Function Specification Output Characteristic Characteristic: Output voltage vs output current for overload conditions until switch off after 4 s at nominal input voltages www.tracopower.
PAGE 5
TIB 120 Series, 120 Watt Output Characteristic (continued) Derating: max load vs input voltage Derating: Load vs ambient temperature www.tracopower.
PAGE 6
TIB 120 Series, 120 Watt Outline Dimensions * Measurement from fron panel to DIN-Rail 118,6* 114,2 36 ±1 M3 Combi Head 6,35 24 VDC/5 A DC OK DC ON 124,2 ±1 V adj. Industrial Power Supply 120 W Model TIB 120-124 100-240 VAC, 50-60 Hz 1.50-0.78 A L DIN-Rail Hook N 9,5 M3 Combi Head Weight: 461g (16.26 oz) Alternative side mounting: 24 VDC/5 A DC OK DC ON DC ON V adj. Industrial Power Supply 120 W Model TIB 120-124 100-240 VAC, 50-60 Hz 1.50-0.