Datasheet

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. June 08. 2016
Page 3 of 3
General Specifications
Casing material non conductive plastic (UL 94V-0 rated)
Pin material copper alloy with gold plated nickel subplate
Weight 5.1 g (0.18oz)
Altitude during operation up to 5‘000 m approved
DC/DC Converters
THI 2M Series 2 Watt
Outline Dimensions
10.161.77
(0.54)13.7
(0.07)
(0.02)
(0.94)23.8
2.54 15.24
3.0
(0.12)
(0.10)
(0.60)
0.5
8.6
(0.34)
(0.13)
3.2
1
7
8
16
10
9
bottom view
Pin Single Dual
1
–Vin (GND) –Vin (GND)
7
No con. No con.
8
No con. Common
9
+Vout +Vout
10
–Vout –Vout
16
+Vin +Vin
Pin-Out
Dimensions in [mm], () = Inch
Pin diameter: 0.5 ±0.05 (0.024 ±0.002)
Tolerances: ±0.25 (±0.01)
Pin pitch tolerances: ±0.05 (±0.002)
Application note: www.tracopower.com/products/thi2m-application.pdf
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.