Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. May 12. 2016
DC/DC Converters
THB 6 Series 6 Watt
Outline Dimensions
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
11
No pin Common
12
–Vout No pin
13
+Vout –Vout
15
No pin +Vout
23
–Vin (GND) –Vin (GND)
24
–Vin (GND) –Vin (GND)
Pin-Out
Dimensions in [mm], () = Inch
Pin diameter ø 0.6 ±0.05 (0.024 ±0.002)
Tolerances ±0.25 (±0.01)
Pin pich tolerances ±0.13 (±0.005)
General Specifications
Temperature ranges – Operating –40°C to +71°C
– Case +95°C max.
– Storage –40°C to +125°C
Derating 3.0 %/K above 60°C
Humidity (non condensing) 95 % rel H max.
Temperature coefficient ±0.02 %/K typ.
Reliability, calculated MTBF (M IL- HDB K-217F at 25°C, ground benign) >700’000 h
Switching frequency 150 kHz typ. (puls width modulation)
Altitude during operation up to 5‘000 m (16‘400 ft) approved
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non conductive plastic (UL 94V-0-rated)
Pin material copper alloy with gold plated nickel subplate
Potting material silicone TSE 3331 (UL 94V-0-rated)
Weight 18 g (0.63 oz)
Soldering temperature max. 265°C / 10 sec.
31.8
2x2.54
20.322.54 2.0
0.5
12.03.8
(1.25)
(0.8)
(0.1) (2x0.1) (0.08)
(0.47)
(0.15)
(0.02)2.54
20.3
15.2
(0.8)
(0.6)
(0.1)
Bottom view
11
1 12
13152324
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.
Application note : www.tracopower.com/products/thb6-application.pdf