Datasheet

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
THB 3 Series 3 Watt
Outline Dimensions
Rev. June 08. 2016
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
11
No pin Common
12
–Vout No pin
13
+Vout –Vout
15
No pin +Vout
23
–Vin (GND) –Vin (GND)
24
–Vin (GND) –Vin (GND)
Pin-Out
Dimensions in [mm], () = Inch
Pin diameter ø 0.6 ±0.05 (0.024 ±0.002)
Tolerances ±0.25 (±0.001)
Pin pich tolerances ±0.13 (±0.005)
General Specifications
Safety approvals – CB test certificate according IEC 60950-1 www.tracopower.com/products/thb3-cb60950.pdf
– CB test certificate according IEC 60601-1(3rd edition) www.tracopower.com/products/thb3-cb60601.pdf
– CSA certificate according UL 60950-1 www.tracopower.com/products/thb3-csa60950.pdf
– CSA certificate according UL 60601-1 www.tracopower.com/products/thb3-csa60601.pdf
– UL certificate according UL 60950-1 www.ul.com File E188913, copy: e188913qqgq2.pdf
Temperature ranges – Operating –40°C to +85°C
– Casing +95°C max.
– Storage –50°C to +125°C
Derating 3.3 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Temperature coefficient ±0.02 %/K typ.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h
Switching frequency 150 kHz typ. (puls width modulation)
Casing material non conductive plastic (UL 94V-0-rated)
Potting material Silicone TSE 3331 (UL 94V-0-rated)
Pin material Copper alloy with goldplated nickel subplate
Weight 13.0 g (0.46 oz)
Soldering temperature max. 265°C / 10 sec.
Altitude during operation up to 5‘000 m (16‘400 ft) approved
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS according RoHS directive 2011/65/EU
Page 3 of 3
31.8
2x2.54
20.322.54 2.0
0.2
10.53.9
(1.25)
(0.8)
(0.1) (2x0.1) (0.08)
(0.41)
(0.15)
(0.008)
2.54
20.3
15.2
(0.8)
(0.6)
(0.1)
Bottom view
111 12
13152324
Application note : www.tracopower.com/products/thb3-application.pdf
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.