Datasheet

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 3 of 3
Rev. March 28. 2016
DC/DC Converters
TES 2N Series 2 Watt
Outline Dimensions
Pin Single Dual
1
–Vin (GND) –Vin (GND)
7
No con. No con.
8
No con. Common
9
+Vout +Vout
10
–Vout –Vout
16
+Vin +Vin
Pin-Out
General Specifications
Safety standards UL 60950-1, IEC/EN 60950-1
Safety approvals and CB certificate (IEC 60950-1) www.tracopower.com/products/tes2n-cb.pdf
certifications CSA (File No. 226037) http:directories.csa-international.org
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material DAP (UL94V-0 rated)
Pin material Phosphor bronze
Weight 5.1 g ( 0.17oz)
Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at:
www.jedec.org - free registration required)
Packaging
www.tracopower.com/products/tes2n-pack.pdf
Soldering temperature max. 260°C / 10 sec.
24.0
(0.94)
0.25
(0.01)
9.0
(0.35)
18.1
(0.71)
13.7
(0.54)
15.24
(0.60)
2.54
(0.10)
3.11
(0.12)
top view
178
16 10 9
0 - 4°
0.15
1.0
(0.04)
10.6
(0.42)
9.4
(0.37)
Ø1.5
(Ø 0.06) vent hole with membrane on bottom side
(to allow proper washing process)
2.8
(0.11)
13.7 (0.54)
15.24 (0.60) 2.54 (0.10)3.11 (0.12)
1.4
(0.055) min.
2.8
(0.11)
Dimensions in [mm], () = Inch
Tolerances ±0.25 (±0.01)
Pin pitch tolerances ±0.05 (±0.002)
Solder Pad Dimension
Application note: www.tracopower.com/products/tes2n-application.pdf