Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (SMD) 5 Vdc 12 Vdc, -12 Vdc

ht tp://www.tracopower.com Page 1 of 4

DC/DC Converter TES 2H Series, 2 Watt

Mod els

• Small SMD package with standard

footprint

• I/O isolatoin voltage 1500 VDC

• Single and dual output models

• Input voltage 5, 12 and 24 VDC

• High efﬁciency up to 80%

• Operating Temperature range

-40 to +85°C

• High accuracy of pin co-planarity

• Qualiﬁed for leadfree reﬂow solder

process according IPC/JEDEC

J-STD-020D

• Available in tape and reel package

• 3-year product warranty

With their small footprint these 2 Watt DC/DC converters are an ideal

and economical solution for many applications where an isolated volt-

age is required. Typical applications are ground loop elimination, noise

reduction, voltage isolation in digital interfaces and voltage conversion

in distributed power systems. With a new package design these con-

verters are qualiﬁed for the higher temperatures requested by lead-

free reﬂow solder processes. For automated SMD production lines the

devices can be supplied in standard tape and reel package.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TES 2-0510H

3.3 VDC 500 mA 70 %

TES 2-0511H

5.0 VDC 400 mA 73 %

TES 2-0512H 5 VDC ±10%

12 VDC 165 mA 77 %

TES 2-0521H (5 VDC nominal)

±5 VDC ±200 mA 74 %

TES 2-0522H

±12 VDC ±83 mA 76 %

TES 2-0523H

±15 VDC ±66 mA 76 %

TES 2-1210H

3.3 VDC 500 mA 72 %

TES 2-1211H 12 VDC ±10%

5.0 VDC 400 mA 75 %

TES 2-1212H (12 VDC nominal)

12 VDC 165 mA 79 %

TES 2-1222H

±12 VDC ±83 mA 80 %

TES 2-1223H

±15 VDC ±66 mA 80 %

TES 2-2410H

3.3 VDC 500 mA 72 %

TES 2-2411H 24 VDC ±10%

5.0 VDC 400 mA 75 %

TES 2-2412H (24 VDC nominal)

12 VDC 165 mA 79 %

TES 2-2422H

±12 VDC ±83 mA 79 %

TES 2-2423H

±15 VDC ±66 mA 79 %

Models

Summary of content (4 pages)

PAGE 1
DC/DC Converter TES 2H Series, 2 Watt • Small SMD package with standard footprint • • • • • I/O isolatoin voltage 1500 VDC • • • • Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating Temperature range -40 to +85°C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D Available in tape and reel package 3-year product warranty With their small footprint these 2 Watt DC/DC converters are an ideal and ec
PAGE 2
TES 2H Series, 2 Watt Input Specifications Input current no load / full load 5 Vin; 3.3 VDC model: 5 Vin; other models: 12 Vin; 3.3 VDC model: 12 Vin; other models: 24 Vin; 3.3 VDC model: 24 Vin; other models: 60 mA / 470 mA typ. 60 mA / 540 mA typ. 30 mA / 190 mA typ. 30 mA / 210 mA typ. 15 mA / 95 mA typ. 15 mA / 110 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max.
PAGE 3
TES 2H Series, 2 Watt Output voltage variation dependent on load (at nominal input voltage) other models: +20% Deviation of Vout nom. Deviation of Vout nom. 3.3 & 5.0 VDC models: +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% +20% +15% +10% +5% max. 0% typ. min. -5% -10% 100% 0 20% 40% 60% Output Load 80% 100% Application note: www.tracopower.com/products/tes2h-application.pdf Outline Dimensions Single Output Models 2.54 (0.35) 5.08 (0.10) 1.5 (0.
PAGE 4
TES 2H Series, 2 Watt Outline Dimensions Dual Output Models 2.54 5.08 (0.10) (0.35) 2.54 (0.20) 1.5 (0.10) 6.15 0-4° (0.06) 6.15 (0.24) 12.3 1.3 3.0 (0.12) (0.24) 0.25 (0.48) Pin Dual 1 –Vin (GND) 2 +Vin (Vcc) 4 Common 5 –Vout 7 +Vout 10 No con. No con. = Pin to be isolated from circuit (0.04) Solder Pad 3.0 9.3 (0.12) 1.8 7 (0.37) 10 (0.06) Ø1.0 (Ø0.04) vent hole (for reflow soldering process) 1 2 0.6 4 (0.02) 16.3 (0.64) (0.52) (0.12) 13.1 3.04 S 8.