Datasheet

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Outline Dimensions
DC/DC Converters
TES 1V Series 1 Watt
Rev. March 8. 2016
Dimensions in [mm], () = Inch
Pin pitch tolerances: ±0.13 (±0.005)
Other tolerances: ±0.25 (± 0.01)
Page 3 of 3
Physical Specifications
Casing material non-conductive plastic (UL 94V-0 rated)
Weight 2.0 g ( 0.07oz)
Lead-free reflow solder process as per J-STD-020D.1 (to find at:
www.jedec.org - free registration rqueired)
Moisture sensitivity level (MSL) level 2 as per J-STD-033B.1 (to find at:
www.jedec.org - free registration required)
Washing process not recommended. Product non-hermetical
Packaging
www.tracopower.com/products/tes1v-pack.pdf
Environmental compliance – Reach www.tracopower.com/products/tes1v-reach.pdf
– RoHS RoHS directive 2011/65/EU
1.82.542.542.545.08
(0.07) (0.10) (0.10) (0.10)(0.20)
0.33 (0.01)
8.0 (0.31)
8.0 (0.31)
16.3 (0.64)
123 56
12 11 10 87
0.25
0-4°
S
1.5(0.06)
5.5(0.22)
11.0 (0.43)
5.5(0.22)
Top view
Ø1.0
(Ø 0.04)
vent hole (for reflow soldering process)
3.0
(0.12)
3.0
(0.12)
Pin Single Dual
1
–Vin (GND) –Vin (GND)
2
+Vin +Vin
3
No con. No con.
5
–Vout Common
6
No con. –Vout
7
No con. No con.
8
+Vout +Vout
10
No con. No con.
11
No con. No con.
12
No con. No con.
Pin-Out
No con. = Pin to be isolated from
circuitry
1.9 (0.07)
2.54
(0.10)
12.0 (0.47)
1.0
(0.04)
5.08
(0.20)
Solder pad dimension
Application note: www.tracopower.com/products/tes1v-application.pdf